Electric motors are just not any other component of the company, but it is one of the most competent and dependable parts of a working place. Ignoring the maintenance of the electric motor will lead to the expenditure of the company in the near future and might also affect the working of the business for the time being. Maintenance of electrical switchgear motor is essential so that the productivity of the working place remains intact. Taking proper measures to prevent the motor from any damage will not only help you to prevent the spending of money on its repair or replacement but also increase its life expectancy. You can get electric motor repair melbourne.
Follow these simple tips to take care of electric motor, so you can avoid expenses and ensure that it remains intact for the long term:
Visual inspection:
Make a routine to keep a daily check on the electric motors. A visual inspection will help to know if something is wrong with it. The change in the appearance of the motor, like a collection of dust, the grease of rust will indicate if the repair is necessary. You should not keep the electric motor that is dirty, greasy, or rusty as it will impact the working of the motor, eventually affecting the productivity of the company. Motors will be greasy at one point, but too much grease is not good for the electric motor. Ensure that you take the needed steps to act on this problem.
Inspect the bearings:
Bearings will help you detect potential problems like lubrication, wear, and tear, collection of dirt, etc. Regular checking will help you to know the issues that arose because of bearings. There are different bearings for different motors, and each one requires different attention and repair. Be aware of the bearings used in your electric motor so you can act accordingly. Do not ignore the need to replace the bearings if necessary.
Vibration test is important:
You need to undergo the vibration test of the electric motor. Vibrations can reduce the lifespan of the motor. That is why it is essential to check the excessive vibrations. Vibrations can be caused by different reasons such as faulty sleeves, ball bearings, improper balance, and too much belt tension. You can check the vibrations by removing the belts and then operate them. One more way is to disconnect the load. The main causes of vibration are usually mechanical problems, but sometimes electric issues can also cause vibrations.
Do not ignore the need for repair:
After opting for all the preventive measures and inspecting the electric motor, do not ignore the need for the repair if necessary. One cannot be so cautious. If the motor is not working properly, do not keep it that way. Find a reputed repair store that will help repair or replace the electric motor for good so that it does not affect the working of your company. Delaying the repair or replacing process will lead to more damage. If you are not able to detect the problem, take it to the nearest store so it can be repaired in no time.
