Choose the Best Office Chair Casters for Home Office

The main purpose of a computer chair is to provide normal working conditions for those workers who spend most of their time at a computer monitor. However, along with the rapid introduction of a personal computer and home Internet into our lives, a home office has become quite commonplace. Along with this, arose the need for the correct equipment for the workplace at home, and therefore the computer chair found its place in the home interior. However, professionals take care of the choice of furniture for the office but the choice for the home will have to be made by the person himself/herself. A chair should become the subject of an interior design solution and fit in style and color. It should, first of all, become a useful assistant in work.

How to choose an office chair?

A dining chair, stool, or deck chair will not provide a comfortable position for the back, arms, and head, and an incorrect fit can lead to serious illness. How to choose a computer chair so that there will be no problems? Going in search of the perfect, you should pay attention to the following parameters:

• Design. It should be massive, on a metal frame. For stability, a 5-ray cross with soft, quiet chair casters is recommended, armrests and a backrest are a must.
• Form. It should be anatomical, lumbar support is desirable, at least with a separate pillow, high back and head restraints are recommended.
• Adjustments. The gas lift in height is required and backrest tilt with fixation is also desirable. Armrests should also adjust up and down and horizontally.

Mechanisms range from a simple element that presses on the lifting rod of the cartridge, to a steep multi-block that controls the backrest tilt, swing, and seat depth. Chair wheels are considered the most vulnerable points of mobile office chairs. Responsible manufacturers fulfill this part to the conscience and declare that before the first breakdowns, the mileage of the desk chair wheels will be at least 15 km.

Office chair rollers can be soft or hard. The choice depends on what kind of flooring is used in the office: if it is tiles, porcelain stoneware, parquet and other hard surfaces, then it is better to take a solution with soft rubber wheels for office chairs. Hard chair caster wheels would be preferable for comfortable movement on the carpet. Some universal models are equally good at riding on soft and hard surfaces.

Varieties

So, let’s talk about the types of rollerblade office chair wheels that have a number of their advantages.

Standard plastic models

The design of these plastic chair roller wheels is simple. They are installed on most office chairs and are great for carpet: hard rollers ride on it much easier than other elements.

Rollers with a skirt

The upper part of the structure is covered with a casing. It protects the office chair casters from damage, for example, if you step on top, you will not damage the moving element. They are perceived as one of the most reliable, although chair rollers are no different in design from analogs without a skirt. You can put this variety on your home chair for work in place of the standard casters and thus improve the look of the furniture at a minimal cost.

Rubberized models

They provide a soft and smooth running of the structure and prevent noise when moving the chair. Such office chair caster wheels do not scratch the surface and do not leave marks on it, they are also well suited for linoleum, as they do not press through the surface and do not damage it.

Fixed position models

The design includes a latch, so the rollerblade casters are used in two modes – movement and a stationary position. You need to press the lock or, conversely, raise it to transfer the roller from one use case to another. The stopper can be made in the form of a pedal. In this case, you do not have to bend over to lock or unlock the chair, everything can be done with your feet, which increases ease of use.

Now, based on the above characteristics, you can decide on the choice of the necessary computer chair wheels.

Disassemble the wheel to clean it

You can easily move over short distances without even getting up from your chair due to the high mobility of the rollerblade chair wheels but sooner or later the details become unusable. And here there are already two ways out – to replace the wheels with new ones or to clean them yourself. As for cleaning, it is not so difficult, and it is possible to cope with a breakdown that has occurred due to accumulated debris without outside help. Moreover, office chair wheel replacement is also a relatively easy process that doesn’t require special skills and long training.

How to repair with your own hands

You can repair the crosspiece and permanent contact failure yourself without appealing to the service center. A broken air chuck or swing mechanism also must be replaced. The same goes for office and gaming chair wheels. If self-repair seems difficult, you can contact the experts, and the replacement caster wheels and all the additional furniture is performed quickly and efficiently.

Crosspiece damage and roller replacement

It is very easy to repair an office chair with your own hands. If the rays of the cross are connected loosely, the part begins to stagger and loses stability. You need to insert a hollow plastic tube of a smaller diameter inside the base to eliminate the malfunction. It must be firmly fixed in the center of the structure. The pipe will play the role of a kind of rod on which the base rests.

If you want to make a chair wheel replacement, you need to carefully remove them from the sockets, without exerting physical effort, and install new ones. The one who repaired the base knows that it’s not difficult at all.

• Knock out the gas lift from the cross.
• Install a new cross.
• Take the recliner wheels off.
• Install new ones.

You will cope with the rollerblade chair wheels but it’s much better for you right off the bat to choose the high-level product by Stealtho Company and enjoy its peculiarities.