This article will highlight the main points that are important for a successful renovation in your bathroom after purchasing tile in the bathroom places or bathroom supply store.
How to put tiles in the bathroom to look flawless and pleases with its durability and practicality for a long time? In this article, we will highlight the main points that are important for a successful renovation. A comfortable bathroom, the design of which will be stylish and practical, can be created both with the participation of professionals and independently. You can check my link.
You can start laying tiles both from the floor and from the walls – the choice depends on the complexity of the planned work.
Five general recommendations on how to lay tiles in the bathroom
Before putting the tiles in the bathroom, check out the essential tips for working with tiles, porcelain stoneware, and other types of ceramics on the “New Bathroom Style” online bathroom vanity store:
Table of Contents
Advice number 1.
The adhesive solution must be mixed in the amount required for several tiles in the proportions recommended by the manufacturer.
Advice number 2.
How to lay the tiles in the bathtub so that they don’t flake off over time? To do this, you need to prepare the glue in a specific sequence properly. The dry mixture is poured into water, and not vice versa. Use a low-speed drill with a whisk attachment to mix the title compound.
During grouting, the remnants of the material must be immediately removed from the ceramics since the hardened composition is very difficult to wipe off. This primarily concerns textured surfaces.
Advice number 3.
To increase the level of adhesion between the mortar, the treated surface, and the tile, the tiles can be immersed in water for 10-15 minutes before laying.
Advice number 4.
When repairing a bathroom, one of the crucial stages is priming. For the base to penetrate deeply into the surface, it is applied more than once. This contributes to the fastening strength of the finish.
When laying tiles on walls, you need to start work from the corner opposite the door.
Advice number 5.
Mosaic tiles will look cleaner if you use a soft base sanding bar to level them. To create an unusual effect, tiles can be placed horizontally rather than vertically on the walls.
TOP 5 Tips on How to Lay Tiles on Your Bathroom Floor
Before laying the tiles on the bathroom floor, the surface is cleaned of all possible contaminants and loose particles. It would help if you also treated the area with a primer to improve the adhesion of the material and the adhesive base. To make the finished surface look neat, you need:
Tip 1.
Spread the tiles from the farthest corner in the room while applying the glue solution with a notched trowel.
Tip 2.
Distance wedges inserted between tiles must be selected based on the size of the tile.
Immediately after completing the tiles, you need to wash the tools until the mortar has hardened thoroughly.
Tip 3.
How to lay the tiles in the bathroom correctly, you can navigate by the first element. To check the correctness of its location, you need to use a level. Disadvantages are immediately corrected.
Tip 4.
In the process of laying tiles, you need to remove excess glue with a damp sponge quickly. If it remains on the tiles, it will be difficult to clean the contaminated areas. Scrubbing with abrasive products can leave microscopic scratches on the tile.
Tip 5.
Repair of a bathroom in Khrushchev and other typical houses requires additional processing of facing materials. You can use a standard tile cutter to cut the tiles. Depending on the thickness and density of the coating, you may need an angle grinder with a cut-off wheel for processing stone.
