Open Locked Door with Iron Wire, the procedure for opening locks with wire

We in some TV shows or movies scenes will see some agents use – small iron wire can smooth the lock, let us very shocked, but in real life also can realize this kind of lock wire method, but need to master certain skills and flexibility, then the following salt for you about the wire lock method. Keep reading, this Lock Picking method will help you out of trouble when you lost your key!

First, we saw the night lock structure can be realized that there is a small cylinder, that is the lock, we can turn the lock on the shell, when we lock the lock without the right key is can’t open, because the lock has been fixed to a position, these fixed lock each of the marbles in lock core and the shell, Therefore, the lock core has also been fixed. When we take the key to open the lock, the tooth of the key will push against the marble inside, so that the lock core is released and can rotate freely, so that we open the lock. Make sure the lock core is turned in the direction of opening the lock. If you are familiar with locks, you will know how to turn them. Some locks, especially many padlocks, are opened without considering the correct steering of the lock core.

Second, before the lock with wire, we want to buy a special lock locks and torque wrench, because they are able to open with the power to help us with wire lock smoothly, then we need to get the torque wrench in the lower part of the keyhole clamp, we need to understand what the direction of the lock can open, rotate handle clockwise twist with wrench must be used, The lock core can only rotate a little bit before being locked, so we need to find the feeling of the lock core stopping.

Third, if we did not turn the lock in the right direction, then the lock core blocked when it will be very hard and dead, so we have to find the right direction, feel the flexible rotation of the lock core. After finding the right direction, we need to apply a relatively weak force on the torque wrench, and to maintain this force, it is important to note that the type of lock, the use of force and direction will be different, so we need to explore.

Fourth, when we use wire to open the lock, we should gently and flexibly apply force. We should use the lock opener to apply force. On the strength of the above marbles, the marbles will fall on the top of the lock cylinder instead of the original hole inside, marbles fall on the wall of the lock should be the sound of click. Then we push the marble upwards, and if there is no rebound force, we have successfully pushed the marble upwards. Then continue to apply torque to the lock core and repeat the above steps, pulling the lock core forcefully until the lock is opened.

If you do not have any iron wire in your hand, what can you do? In this situation, I think you can prepare some Lock Picking Kit at lockpickmall.com, some lock picks are small and easy to carry, you can put them in your wallet or pocket! That way, the next time you’re in a situation like this, you can pull them out to help you out!