Netgear routers have set the bars too high when it comes to accessing a seamless internet. The high-speed internet allows you to watch online movies and play online games. But, it becomes irritating when the internet connection suddenly drops. Millions of Netgear users face this problem. If you are also facing the Netgear WiFi not working, issue, then we have a solution for you. In this article, we will reveal all the reasons why your Netgear router is not working and how can you fix the issue. Continue reading.
Why Your Netgear Router is Not Working?
Following are the reasons that prevent your WiFi router from working:
Insufficient power supply.
Incorrect placement of the Netgear router.
Improper connection between the router and modem.
Partial routerlogin.net setup
Obsolete or corrupted firmware.
Now that you are familiar with the reasons behind the issue, let’s discuss the troubleshooting tips that can help you fix it.
Fixed: My Netgear Router is Not Working
Check the Power Outlet
If your Netgear router stops working suddenly, then it might be due to an inadequate power supply. Check if the power outlet to which you have connected your WiFi device is working or not. Also, check the status of the power LED on your router. If it is glowing green, it means that the WiFi router is getting enough power supply.
If the power LED is blinking or amber, then reboot your Netgear WiFi router. Perhaps, rebooting will fix the issue for you. If the issue continues, plug your Netgear router into another wall socket..
Place Your Netgear Router Correctly
Is your Nighthawk router placed at its ideal location? Probably not. If you have placed your WiFi device at the blind spots, the router will find it difficult to amplify the WiFi signals coming from your modem Place the router in a well-ventilated area instead. The perk of placing your router in an open space is that it won’t overheat due to excessive usage. Besides this, consider the following points to place your WiFi device correctly:
Place your Netgear router within the range of the modem. It would be a wise decision to place both devices in the same room.
Avoid placing your WiFi device close to a corner or a concrete wall.
Don’t place your Netgear WiFi router within the range of reflexive surfaces, Bluetooth devices, and electronic gadgets. Doing so will prevent the interference of WiFi signals coming from your device.
Connect the Router and Modem Properly
If you haven’t connected your Netgear router and modem properly, then it can also result in the router not working issue. Therefore, stabilize the connection between both devices. If you have connected them wirelessly, replace the connection with a wired one. Make use of an Ethernet cable to connect both devices. But, make sure that the connection is strong and secure. Avoid using a damaged Ethernet cable.
Reset Your Router
If the above-mentioned troubleshooting tips failed to work for you, don’t feel out of luck. You can still fix the issue. All you need is to restore your Netgear router to factory default settings. So, grab a pin-like object and press the Reset button on your WiFi device. As soon as you release the Reset button, the router will be restored to factory default settings. Now, perform router setup from scratch by accessing the Netgear Nighthawk router login page.
Conclusion
This was all about how to troubleshoot the Netgear router not working issue. We hope that you will be able to resolve the issue and regain access to the seamless internet by following the troubleshooting tips discussed in this article.
