How to use tile saw? ( A Beginner’s Basic Guide)

According to PickThetools.com, A tile saw is a tool the same as a miter saw; the main difference is a water cooling system and uses a diamond-coated blade. If you want to have a straight line, considers this type of tile saw for the homeowner. Maybe you want to cut special cut like L-shape, using tile saw will be important. Below we have step by step on how to use a tile saw.

Position the tile saw onto the level.  

You need to make sure your tile saw well levelled and secured before starting to cut. We recommended to position on the heavy and bulk table or directly to the floor. 

For your safety and protection, do not operate the saw on the wobbly or sharky surface; this can cause injuries or serious damage to you. You can see our recommendations on Welding Hubs.com

Fill the reservoir with water

All the tile saw come with a trough of water mounted underneath the cutting surface. You decide to remove the trough or fill it manually to others. Therefore, make sure the water pump is completely submerged before start working. Check your blade line is up to according to the pencil mark and check your tile saw for the homeowner.

Place the tile into the blade. 

Make sure you adjust the fence when the tile pushed against it. This can assist in keeping your hand far from the blade possible. 

Carefully place tile saw for homeowner edge for proper maintaining. For accuracy, mark the line which the blade will follow. 

You are making a diagonal cut. Make sure to have a speed square or miter guide between the tile and fence. It will enable the tile positioned at a t45-degree angle to the saw blade. You can feed the tile on the desired length for making the partial cut.

Turn the tile saw on. 

After you have done all that and water is flowing correctly, turn on the saw now. Check everything according to the instruction before turning on.

When you are cutting, make sure the hands are dry to avoid slipperily. Make sure the blade is free from anything. 

Feed the blade 

Using a steady grip, feed your tile piece slowly onto the blade. Let the blade do the work of cutting. Please don’t force it to move faster. Since the saw blade is stationary, you need to move cutting material to cut. 

When feeding takes care to avoid breakage at this process, do it slowly at the edge of the tile. 

Check the cuts 

As you cut, make sure cutting is going the way you want them to be. Ensure the blade is functioning at the required speed. Tiles are moving toward the blade, and water flowing smoothly. Once you check out, everything is fine to continue sawing. 

Remove the tile and turn off the tile saw for the homeowner.

After finishing the cut, it’s time to remove the tile and turn off the saw. Turn off the blade first before switching the water off. Be careful when pulling out the saw to avoid injuries. Once done, you can prepare the next tile. 

Check the water take and ensure there is enough water. To operate without water is dangerous because the blade overheated the tile, and it can cause a break. The edge of the tile is sharp, and you need to handle them with care. 

Clean the saw 

This is the final stage. Once you unplugged the tile saw for the homeowner, the remaining thing to clean the saw. You can use a towel to clean; don’t leave the saw without cleaning. You will need to use it next time; therefore, your blade saw supposed to function properly. 

Do not pour the water on your yard when cleaning rather find a place to dispose of. The mineral from the tile are harmful and can kill your yard. 

Conclusion 

Tile saw for the homeowner is an excellent tool to use. We hope the above step on using tile saw will be a great help to you and others who read it. 

It will be important to show others how to use the saw since most people do not have this idea. If you are a beginner or experienced, it’s a great idea to consider correct use.