How to use a broken key extractor?

A key may get break inside the car ignition when you try to turn on the engine, or it might break inside any other lock like a door lock, etc. When the key breaks inside the lock, it becomes difficult to get it out easily. There are many methods to extract the broken key from a lock.

But the locksmith have manufactured some broken key extracting tools to extract the broken keys from the locks, and locksmiths in Philadelphia actively using modern technologies. The key broken inside the switch or a lock can easily be extracted using a key extractor in no time.

Structure of the key extracting tool

These extractors are a complete set of 10 to 12 little screw driver-like handles with tiny wires above them. Some of the wires have a lip and some have little hooks above them. These are used to pull the key out of the area where it is stuck.

These are designed in a specific way so that you can snap the key out without opening the lock. Now we will share the method of using these key extractors perfectly to get the key out of the lock without opening the entire lock.

The working of the extractors

As you know that the extractors are in two forms. The lip form and the hook form. You can use either of these to get eh key out depending on the situation you are facing.

Bothe the extractors are valuable and can easily get eh job done. However, as you know that there is not much difference in the keys, the structure of the extractor doesn’t matter. The only thing that matters is that the extractor must be sharp and tiny enough to enter the lock and pull the key out of it.

The operation is very simple and can be understood quite easily. Use one of the extractors and enter it inside the lock and push all the pins above to free the key from being hold.

After the pins are no more holding the key, use another extractor to hook and pull the key out of the lock. After the second extractor is able to hook the key, then gently pull the broken key out of the lock.

This is all a simple method of using a broken key extractor to extract the broken key from the lock. Hope that all this information will be worth it. You can easily get the broken key out of any lock without opening it after you have known all the things mentioned here.