Once you get your lift for your garage, the next thing you need to do is ensure you have it installed. Without proper installation, the lift will be a hazard for your garage and could lead to nasty accidents. It can also damage the cars you are working on and lead to lawsuits. To help you with this, here are the steps you will follow when you finally get your lift delivered to the garage.
Choose the right lift
The first thing you need to do is choose the right lift. Since there are so many in the market, you might want to figure out the best one. Most small garages go for the 2 post car lifts. It works well with smaller cars and does not take too much space. If you have a bigger garage then you can always go for the bogger lifts. At the end of the day, the right lift will ensure your garage works efficiently.
Put together the metal frame
Once you have ordered the lift, you need to assemble the frame. Ensure that the posts you have for the frames are built on a solid concrete frame. If you think the concrete in that area is not solid, you might have to dig into the ground at least 6 feet and fill it up with concrete. That way, your metal frame will be attached to a steady foundation.
Install the hardware
Once you have your metal frame installed, the next thing you need to do is get into the hardware. That will include all the cables, hydraulic systems as well as locks. Once you install this hardware, you are sure your lift will work perfectly without any issues. Ensure everything is well connected and the levers are all put in place. Poorly connected hardware will lead to the lift not being well connected to the system, affecting its efficiency.
Raise the lift
Once you have the hardware in place, you need to place it in the lift. Get a couple of your strong friends because there will be a lot of lifting and coordination involved. Make sure that it is well balanced before putting it into the frame and connecting it to the hardware. It might take a couple of tries to make it right, so don’t rush the process.
Finish up the installation
Once you have the lift installed, get an electrician to finish up connecting the power source. Using a professional electrician will ensure that everything works according to plan. Do not try to install it yourself since any small issue could affect the entire system and make all your work be for nothing. Once the electrician has worked on the lift, you are ready to start work.
Installing your lift the right way will ensure that everything runs smoothly and you do not have any issues with it during work. Take your time installing it, and that will ensure that the lift will work with no issues. If you cannot connect it on your own, getting a professional would help.