6 Effective Tips For Cleaning A Gun

Cleaning a gun is not a simple process as simple as it sounds, it is not possible to complete the process without the right equipment. Wrong tools and techniques can make the task even harder than it already is and also can cause damage to your precious gun. Knowing the right techniques and using the right tools for maintenance is very important. It is better to be safe than sorry when you are handling a dangerous thing such as a gun. Reloading data will provide you with detailed information regarding best ammo service.

1. Clean the Barrel and Chamber

You can start by dry brushing the chamber with a copper-(phosphate bore brush to muzzle direction. It will loosen up and remove a large portion of the carbon and metal fouling from the bore. You need to  push the cleaning patch  dipped in bore solvent on the tip of your cleaning rod. Push the cleaning patch through the barrel and out the other side and saturate the chamber and bore surface. Do not pull it back through or it will redeposit the dirts back again. Use  a pull through tool with a light lubricant for further cleaning , Avoid lubricating the bore with gun oil. Also, clean the exterior of the barrel, barrel hood and lug and feed ramp.

2. Work On The Action

Not just the barrel, you need to properly clean the action (slide, pump or bolt)  using a nylon utility brush,dry cloth and actio cleaner solvent. Spray the action liberally from the top of the frame, it will allow the carbon and metal wastage to be washed in the drip pan. Let the cleaned sub-assemblies dry. It is highly recommended not to over-lubricate, as it will more attract contaminant accumulation and may cause reliability issues.

3. Magazine

Magazine, the source of ammunition is also an important part to clean. The magazine can be disassembled, cleaned and reassembled with the manufacturer’s guidance manual. There are special brushes available in the market for the purpose of magazine cleaning. It is recommended to use safety glasses when working with magazines. Never use petroleum products for magazine cleaning purposes, it may contaminate ammunition primers. Cleaning a magazine with a residue-free solvent is better than lubricating it.

4. Reassemble the Firearm and Do A Quick-Check

After disassembling and reassembling the firearm, a functional checkup is a very needed task to get over with to ensure the firearm works still properly or not. During the check-up, go through the functioning of the trigger mechanism, safety-locks, slides and pumps, magazine retention and ejection and overall everything there is. You can follow the manufacturer’s guidance procedure to get 100% satisfaction if you are confused about how to do it. .

5. Wipe Down The Gun

Once the inside and moving parts of the gun are lubricated properly, it’s time to give the exterior of the gun a proper cleaning. A reel/gun cloth is perfect for this job. These clothes are made with soft material and pre-treated with silicone lubricant. It helps to get rid of any leftover debris or acidic prints and also give a nice shiny look to your firearm.

6. Ensure Proper Storage

Never slack off in ensuring your gun’s proper storage. It is a very important task to keep your precious firearm working. It is as important as cleaning your gun. Make sure to purchase a case for your firearm that suits the size and style of the gun. Better to put a pistol in a pistol case and rifle to rifle’s. Choosing smartly can pay you off in the long run. Right case should also provide the gun with a suitable humidity level environment and ensure protection against dust and rust.

Cleaning a gun is not a hard thing to handle if you follow these 6 simple steps. Remember, if you are dealing with a dangerous tool such as a gun, be sure you take proper care of it. Have a good day.