5 Steps on How to Properly Clean Your Carpet

There are several benefits of having carpeting in your home. For example, carpeting keeps your feet warm and provides a cushion, which is better for your feet’s health. Unfortunately, cleaning a carpet is a bit more challenging than cleaning hard floors.

The fibers of your carpet will absorb spills and messes, which then soak into the foam underneath the carpeting. When this happens, stains can become stubborn and difficult to remove. Stinky smells can also appear.

If you know how to clean your carpet correctly, however, then you can ensure it stays in good condition for years to come! Are you ready to conduct proper carpet maintenance and bring those carpets back to life?

Continue reading below to discover the carpet maintenance guide every carpet owner needs.

1. Vacuum First

If you’re wanting to complete a routine carpet cleaning, then be sure to start by vacuuming the carpets first. You don’t want to vacuum over fresh liquid spills, as this could damage your vacuum. Instead, take this step when you’re simply wanting to clean your entire carpets as a regular maintenance routine.

The vacuum will remove any dirt and dust that’s loose in the carpet fibers. Removing this loose dirt will make the cleaning process easier for you.

2. Blot the Stain

If there’s a fresh spill on the carpet, then you’ll want to blot the stain. Don’t scrub. Scrubbing the stain will cause the mess to be spread further into the carpeting.

Take a fresh cleaning rag and put pressure down on the stain. This will help remove some of the liquid. Do this a few times until all the excess liquid has been absorbed by the cleaning rag.

You might need to switch out the cleaning rag for a new one a few times. Then, use a spot cleaner on the stain and blot again. Repeat a few times.

3. Rinse the Area

Once you’re done blotting the stain with the cleaner, you can then rinse the area. You don’t want to use too much water on the carpet, so be sure to wet a cleaning rag to blot with, rather than pouring water on the carpet. Begin to blot the stain with lukewarm water on a cleaning rag.

Dab the stain with the rag starting from the outside of the stain and working your way in.

4. Blot to Dry

After rinsing, you’ll then need to dry the area. Take a dry cleaning rag and place pressure on the wet area. Do this a few times with several dried cleaning rags if needed.

Continue to do this until no excess water is absorbed into your cleaning rags. Be sure not to place anything on top of the area for several days. This will allow it to air dry properly.

5. Hire the Professionals

When the entire carpeting needs cleaning, or when spot cleaning isn’t getting the job done, it’s time to consider using a professional carpet cleaning service. For example, the professionals at Best Choice Carpet Cleaning will ensure the carpeting is cleaned well, giving you results you can’t get from shampooers.

Take your time and do some research until you find a service with the best reviews.

Clean Your Carpet the Right Way for the Best Results

If you want to clean your carpet the right way, then follow the simple steps listed in this guide above. When you clean your home’s carpeting the right way, you can expect the best results.

Are you interested in other posts with topics similar to this one?

If so, be sure to visit on a regular basis!